Simple steps to start saving
We want to help you manage energy use for your business, office, school, commercial or industrial facilities in a way that helps your bottom line as much as possible. Here are simple tips that can result in savings for you and your business.
Heating and Cooling
- Make sure your HVAC system is operating efficiently.
- Inspect and clean or replace air filters on a regular basis.
- Repair leaks in system components such as pipes, steam traps or couplings.
- Adjust the thermostat during unoccupied times or install a programmable thermostat.
- Reduce air conditioning hours.
- Make sure radiators, air intake vents, etc., are not obstructed so that air can flow freely.
- Control direct sun through windows depending on season and climate.
- Use hot water wisely. Set water temperature only as hot as needed. (Check your local codes for specifications for your business.)
- Insulate hot water holding tanks and hot and cold water pipes.
- Install faucet aerators and efficient showerheads.
- Find and fix leaks.
- Use plants native to your climate that require minimal watering and possess better pest resistance.
- Install motion sensors to automatically turn off lights when rooms are not in use.
- Replace incandescent light bulbs with LED bulbs.
- Lower light levels where appropriate such as around computer monitors.
- Install LED (light-emitting diode) exit signs.
- Install timers or photocells on outside lights.
- Avoid over lighting areas.
- Perform routine maintenance, such as vacuuming, to remove dust.
- Turn off the lights in walk-in refrigerators/freezers.
- Add strip curtains to refrigerated spaces without doors.
- Defrost regularly.
- Retrofit or replace old refrigerators and freezers.
- Turn off office equipment/machines when not in use, wherever possible. (Myth: Equipment lasts longer if it is never turned off.)
- Unplug appliances/equipment or use power strips. Devices draw power even when switched off.
- Maintain your equipment to ensure efficient performance.
- Use energy efficient computers and office equipment.
- Make sure your motors and motor systems are running at optimum efficiency.
- Buy ENERGY STAR® qualified products.
- Electric motors make up the largest end use of electricity in the U.S., accounting for approximately 60-70 percent electricity consumption in industrial applications. Energy expenditures can be 10 percent or more of total operating costs.
- Electricity used by industrial motor-driven systems accounts for 25 percent of total electricity sales in the U.S. – representing the largest single category of electricity use in the country.
- Optimizing industrial motor systems through the implementation of mature, proven, cost-effective energy-saving techniques can reduce U.S. industrial energy costs.
- Industrial customers benefit from improved control of production processes, reduction in waste materials and improved environmental compliance.
We all know standing with the refrigerator door open lets out the cold. But there are lots of other ways you could be losing money. Find some ideas here.